Practical hints
Bleeding the fuel system (diesel engine only)
Driving the vehicle until the fuel tank is
empty is not recommended. Otherwise, air
may be sucked into the fuel system. If this
happens, the ? malfunction indicator
̈ Turn the SmartKey in the starter switch
to position 3 (୴ page 40) and hold it
there for a maximum of 40 seconds or
until the engine runs surge-free.
lamp (USA only) or the ±
malfunction
If the engine does not start:
indicator lamp (Canada only) comes on
and the engine may not start immediately
after refueling the vehicle.
̈
̈
Wait for approximately 2 minutes.
Turn the SmartKey in the starter switch
to position 3 (୴ page 40) and hold it
there for a maximum of 40 seconds or
until the engine runs surge-free.
After refueling:
̈
Make sure the automatic transmission
is set to P.
If the engine still does not start, do not
make any further attempts to start the
engine. Contact an authorized
The gear position indicator in the multi-
function display should be onP.
̈
Do not depress the accelerator.
Mercedes-Benz Light Truck Center or call
Roadside Assistance (୴ page 298).
i Vehicles with KEYLESS-GO*: If necessary,
remove the KEYLESS-GO start/stop button from i When the ? malfunction indicator lamp
the starter switch (୴ page 40).
(USA only) or the ± malfunction indicator
lamp (Canada only) has been illuminated for the
above condition, it will remain illuminated until
the engine was cycled on and off four times in a
row.
̈
Turn the SmartKey in the starter switch
to position 2 for at least 10 seconds
(
୴ page 40).
̈
Return the SmartKey in the starter
switch to position 0 (୴ page 40).
488
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.