Practical hints
Battery
Step 8 (Removing)
Step 9 (Reinstalling)
̈ Carry out step 10 to reconnect the
battery (୴ page 495).
̈
Carry out step 8 in reverse order
୴ page 495).
(
̈ Follow steps 5 to 1 in reverse order to
completely reinstall the battery
!
The battery, the battery ventilation hose 9
(
୴ page 494) to (୴ page 491).
and the lateral plug d (୴ page 495) must
always be securely installed when the vehicle is
in operation.
Step 10 (Reconnecting)
̈
If the battery has been removed, first
carry out step 8 in reverse order
(
୴ page 495).
c Battery
̈
̈
Open the driver’s door.
̈
Tilt the battery c with the negative
Make sure all electrical consumers are
turned off.
terminal side upwards.
̈
Take out the battery maintaining its
tilted position in the direction of the
arrow.
Make sure the SmartKey is removed
from the starter switch.
̈
Vehicles with KEYLESS-GO*:
Battery, shown removed for illustration
̈
Make sure the vehicle’s on-board
electronics have status 0 (Open the
driver’s door. With the driver’s door
open, the vehicle’s on-board elec-
tronics have status 0, same as with
the SmartKey removed from the
9
Battery ventilation hose
d Vent plug
starter switch (୴ page 39)).
୴୴
495
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.