Practical hints
Towing the vehicle
̈
̈
Remove the KEYLESS-GO* start/stop
button from the starter switch
!
Installing towing eye bolt
Towing of the vehicle should only be done
using the properly installed towing eye bolt.
Never attach a tow cable, tow rope or tow rod to
the vehicle chassis, frame or suspension parts.
(
୴ page 41).
Depending on whether you are towing a
vehicle or you are being towed, the towing
eye bolt can be screwed into threaded
holes which are located behind covers on
the right-hand side of each bumper.
Insert the SmartKey with
KEYLESS-GO* into the starter switch.
i To signal turns while being towed with
hazard warning flasher in use, set the starter
switch to position 2 and activate combination
switch for left or right turn signal in usual manner
̈
̈
̈
Switch on the ignition.
Depress the brake pedal.
–
only the selected turn signal will operate.
Shift the automatic transmission to
neutral position N.
Upon canceling the turn signal, the hazard warn-
ing flasher will operate again.
̈
̈
Release the brake pedal.
If engaged, release the parking brake
(
୴ page 57).
̈
Switch off the ignition and leave the
SmartKey with KEYLESS-GO* in the
starter switch.
1 Cover
501
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.