Getting started
Driving
Turn signals
The combination switch resets automati-
cally after major steering wheel move-
ment.
̈ Switch on the ignition (୴ page 40).
Do not operate the windshield wipers when
the windshield is dry. Dust that accumulates on
a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs on
a dry windshield. If it is necessary to operate the
windshield wipers in dry weather conditions,
always operate the windshield wipers with
windshield washer fluid (୴ page 62).
!
The combination switch is located on the
left of the steering column.
i To signal minor directional changes such as
changing lanes, press combination switch only
to point of resistance and release. The corre-
sponding turn signal will flash three times.
Windshield wipers
!
If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off immediate-
ly.
The combination switch is located on the
left of the steering column.
ț
For safety reasons, stop the vehicle in a safe
location and
Combination switch
ț
remove SmartKey from starter switch
1
2
Turn signals, right
Turn signals, left
or
ț
turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, starter switch is in
position 0, same as with SmartKey
removed from starter switch)
̈
Press the combination switch in
direction of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes (୴ page 26).
Combination switch
before attempting to remove any blockage.
Remove blockage.
1
Single wipe
ț
ț
Wiping with windshield washer fluid
Switching on windshield wipers
Turn the windshield wipers on again.
2
60
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Comments are closed.