Practical hints
Flat tire
̈
̈
Vehicles with screw-type jack: Turn
crank 4 clockwise until jack 3 is fully
seated in take-up bracket 2 and the
jack base evenly meets the ground.
Removing the wheel
Vehicles with scissors-type jack:
Turn ratchet 4 up and down until
jack 3 is fully seated in take-up
bracket 2 and the jack base evenly
meets the ground.
̈
Continue to turn crank/ratchet 4
until the wheel is a maximum of 1.2 in
Screw-type jack (example illustration)
1
Alignment bolt
(3
cm) from the ground.
̈
Unscrew upper-most wheel bolt and
remove it.
̈
Replace this wheel bolt with alignment
bolt 1 supplied with the tool kit
(
୴ page 448).
̈
Remove the remaining wheel bolts.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolts and wheel
hub threads.
Scissors-type jack (example illustration)
̈
Remove the wheel.
483
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.