Controls in detail
Driving systems
The rear view camera is an optical parking
aid. It shows you the area behind the vehi-
cle in the COMAND system display when
reverse gear R is engaged, for example
during parallel parking.
Switching the rear view camera on and
off
ț
there is a sudden change in tempera-
ture, e.g. if you drive into a heated ga-
rage from the cold (lens condensation)
̈
̈
Switch on the ignition (୴ page 40).
ț
ț
the camera lens is dirty or covered
the rear of your vehicle is damaged
Shift the automatic transmission in
position R (୴ page 185).
The rear view camera is located near the
tailgate handle.
In this case, have the position and set-
ting of the camera checked by a quali-
fied specialist workshop.
The area behind the vehicle appears in
the COMAND system display.
Mercedes-Benz recommends that you
visit a Mercedes-Benz Light Truck
Center for this purpose.
i The area behind the vehicle is shown in the
COMAND system display as a mirror image, like
in the rear view mirror.
Do not use the rear view camera in these sit-
uations. Otherwise you could injure yourself
or others and/or damage property including
your vehicle while parking/maneuvering.
i The image from the rear view camera will no
longer be displayed if you select another
function on the COMAND system while reverse
gear R is engaged. To display the image again,
disengage and reengage reverse gear R.
̈
Shift the automatic transmission
into P, N or D to switch off the rear
view camera.
1
Rear view camera
265
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.