Controls in detail
Loading
cated on the certification label which can
be found on the driver’s door B-pillar
For additional safety when transporting
cargo while the rear seats are unoccupied,
fasten the outer seat belts crosswise into
the opposite side buckles.
(
୴ page 510).
For more information, see “Tire and Load-
ing Information” (୴ page 352).
The handling characteristics of a fully load-
ed vehicle depend greatly on the load dis-
tribution. It is therefore recommended to
load the vehicle according to the illustra-
tions shown, with the heaviest items being
placed towards the front of the vehicle.
Load distribution
The gross vehicle weight which is the
weight of the vehicle including fuel, tools,
spare wheel, installed accessories, pas-
sengers and luggage/cargo must never
exceed the load limit and Gross Vehicle
Weight Rating (GVWR) for your vehicle as
specified on the placard located on the
driver’s door B-pillar (୴ page 510). In addi-
tion, the load must be distributed in such a
way so that the weight on each axle never
exceeds the Gross Axle Weight Rating
(GAWR) for the front and rear axle. The
GVWR and GAWR for your vehicle are indi-
Please pay attention to and comply with
the following instructions when loading the
vehicle and transporting cargo:
i The cargo compartment is the preferred
place to carry objects. The expanded cargo com-
partment (୴ page 269) should only be used for
items which do not fit in the cargo compartment
alone.
ț
ț
Always place items being carried
against front or rear seat backrests,
and fasten them as securely as possi-
ble.
The heaviest portion of the cargo
should always be kept as low as possi-
ble against front or rear seat backrests.
267
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Comments are closed.