Practical hints
What to do if …
Display message
Possible cause/consequence
Possible solution
ESP
Unavailable
The ESP was deactivated because When the voltage is above this value again, the
®
See Operator’s Manual
of insufficient power supply. The
charging voltage has fallen below
ESP is operational again and the message in
®
the multifunction display should disappear.
10
volts.
If the message in the multifunction display does
The brake system is still functioning not disappear:
normally but without the ESP
available.
®
̈
̈
Have the generator (alternator) and the
battery checked.
Have the system checked at an authorized
Mercedes-Benz Light Truck Center as soon
as possible.
If the yellow ESP
®
warning
As soon as the brakes have cooled off, the
lamp v flashes while driving and 4-ETS switches on again.
this message appears, the 4-ETS has
switched off to prevent overheating
of the drive wheel brakes.
The message in the multifunction display disap-
®
pears and the ESP warning lamp v goes
out.
The self-diagnosis has not been
completed yet.
The display will clear after driving a short
distance at a vehicle speed of above
12
mph (20 km/h).
419
Product Specification
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Comments are closed.