26
THINGSTOKNOWBEFORESTARTINGYOURVEHICLE
3.
together. Make sure there is an even gap betw een the two
halves. Test transm itter operation.
To reassem ble the transm itter case snap two halves
Tosetthealarm:
Remove the keys from the ignition switch and get out
of the vehicle.
Lock the door using either the door key, power door
1.
SECURITYALARMSYSTEM—IFEQUIPPED
The system monitors the doors, liftgate, and ignition
switch for unau thorized operation.
2.
lock switch, or the Keyless Entry Transm itter and close all
doors.
If som ething triggers the alarm , the system will signal for
abou t 18 minu tes. For the first 3 minu tes the horn will
sou nd and the head lights, park lights, tail lights and the
ind icator light in the cluster will flash. Then the exterior
lights will flash for another 15 minu tes.
3.
The ind icator light in the instru ment cluster will flash
rap idly for 16 second s. This show s that the system is
arm ing. During this period , if a door is opened , the
ignition switch is turned ON, or the power door locks are
unlocked in any manner, the system will autom atically
disarm . After 16 second s the ind icator light will flash
slow ly. This show s that the system is fully arm ed.
If the monitored system , which triggered the alarm is
deactivated the alarm will continu e to sou nd until 3
minu tes of alarm time is reached . If the monitored
system , which triggered the alarm is deactivated after the
alarm has been on for 3 minu tes the alarm will shu t off
immediately.
Product Specification
Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
---|---|
Model Year | 2005 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Owmers manual did not come with the car I purchased