302
MAINTAININGYOURVEHICLE
GlassSurfaces
1. Clean with a wet soft rag. A mild soap solu tion may be
used , but do not use high alcohol content of abrasive
cleaners. If soap is used , wipe clean with a clean damp
rag.
All glass surfaces shou ld be cleaned on a regu lar basis
with any commercial hou sehold -typ e glass cleaner.
Never use an abrasive typ e cleaner. Use caution when
cleaning insid e rear wind ows equ ipped with electric
defrosters. Do not use scrap ers or other sharp instru -
ments which may scratch the elem ents.
2.
Dry with a soft tissu e.
SeatBeltMaintenance
Do not bleach, dye or clean the belts with chem ical
solvents or abrasive cleaners. This will weaken the fabric.
Sun damage will also weaken the fabric.
InstrumentPanelCover
The instru ment panel cover has a low glare surface which
minim izes reflections in the wind shield . Do not use
protectants or other prod ucts which may cause und esir-
able reflections. Use soap and warm water to restore the
low glare surface.
If the belts need cleaning, use a mild soap solu tion or
lukew arm water. Do not rem ove the belts from the
vehicle to wash them .
CleaningPlasticInstrumentClusterLenses
The lenses in front of the instru ments in the vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
Replace the belts if they appear frayed or worn or if the
buckles do not work prop erly.
Product Specification
Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
---|---|
Model Year | 2005 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Owmers manual did not come with the car I purchased