PROCEDUREFORSTORING
MEMORY
push the memory switch 1 or 2 fully for at
least1second.
The indicator light for the pushed memory
switchwillcomeonandstayonforapproxi-
mately 5 seconds after pushing the switch.
Aftertheindicatorlightgoesoff,theselected
positionsarestoredintheselectedmemory
Two positions can be stored in the automatic
drivepositionermemory.Followtheseproce-
durestousethememorysystem.
(1
or 2). Pushing the unlock button on the
keyfobwithin this 5 seconds, will link the
selectedmemorytothekeyfob.
Whenthelinkiscompleted,theindicatorlight
of the selected memory switch will blink for
approximately5seconds.
SPA1584
When you unlock the door with the link
completedkeyfob,thedriver’sseatwillmove
backandmovetothememorizedposition.
1.
Set the selector lever to the P (Park)
position.
2.
3.
TurntheignitionON.
If memory is stored in the same memory
switch,thepreviousmemoryandthememory
whichislinkedtothekeyfob,willbedeleted.
Adjust the driver’s seat, outside mirrors and
pedals to the desired positions by manually
operating each adjusting switch. For addi- Confirmingmemorystorage
tional information, see “Seats” in the “1.
¼
Turn the ignition ON and push the SET
switch. If the main memory has not been
stored, the indicator light will come on for
Seats, restraints and supplemental air bag
systems”sectionand“Pedalpositionadjust-
ment”earlierinthissection.
approximately
0.5
seconds.
When
the
memoryhasstoredtheposition,theindicator
lightwillstayonforapproximately5seconds.
During this step, do not turn the ignition to
anypositionsotherthanON.
4.
PushtheSETswitchand,within5seconds,
¼ Ifthebatterycableisdisconnected,orifthe
Pre-drivingchecksandadjustments 3-17
| Categories | Nissan Manuals, Nissan Murano Manuals |
|---|---|
| Tags | Nissan Murano 3.5 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)