ENGINEOIL
CHANGINGENGINECOOLANT
5. Removethedipstickagainandchecktheoil
level. It should be between the H and L
marks. If the oil level is below the L mark,
remove the oil filler cap and pour recom-
mended oil through the opening. Do not
overfill.
Contact your NISSAN dealer if replacement is
required.
¼
Majorcoolingsystemrepairsshouldbeper-
formed by your NISSAN dealer. The service
procedures can be found in the appropriate
NISSANServiceManual.
6.
Recheckoillevelwithdipstick.
It is normal to add some oil between oil
the
break-inperiod,dependingontheseverity
ofoperatingconditions.
¼
Improper servicing can result in reduced
heaterperformanceandengineoverheating.
maintenance
intervals
or
during
WARNING
CAUTION
¼
¼
Toavoidbeingscalded,neverchange
thecoolantwhentheengineishot.
SDI0534
CHECKINGENGINEOILLEVEL
Oil level should be checked regularly.
Operating with insufficient amount of
oil can damage the engine, and such
damageisnotcoveredbywarranty.
Neverremovetheradiatorcapwhen
the engine is hot. Serious burns
could be caused by high pressure
fluidescapingfromtheradiator.
1. Parkthevehicleonalevelsurfaceandapply
parkingbrake.
2.
Run the engine until it reaches operating
temperature.
¼
¼
Avoid direct skin contact with used
coolant.Ifskincontactismade,wash
thoroughlywithsoaporhandcleaner
assoonaspossible.
3.
Turn off the engine. Wait more than 10
minutesfortheoiltodrainbackintothe
oilpan.
Keepcoolantoutofreachofchildren
andpets.
4.
Removethedipstickandwipeitclean.Rein-
sertitalltheway.
Maintenanceanddo-it-yourself 8-9
| Categories | Nissan Manuals, Nissan Murano Manuals |
|---|---|
| Tags | Nissan Murano 3.5 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)