grammed HomeLink button - releasing
whenthedevicebeginstoactivate.
button,
HomeLink
firmly
button you’ve just programmed.
press
and
release
the
PressandreleasetheHomeLink buttonup
tothreetimestocompletethetraining.
5.
6.
IftheindicatorlightontheHomeLink blinks
rapidlyfortwosecondsandthenturnssolid,
HomeLink
has picked up a “rolling code”
8. YourHomeLink buttonshouldnowbepro-
garagedooropenersignal.Youwillneedto
proceed with the next steps to train the
grammed.
HomeLink
(To
buttons for additional door or
program
the
remaining
HomeLink
to complete the programming
gateopeners,followsteps2through8only.)
which may require a ladder and another
personforconvenience.
NOTE:
Donotrepeatsteponeunlessyouwantto
Press and release the “smart” or “learn”
program button located on the garage door
opener’s motor to activate the “training
mode”.Thisbuttonisusuallylocatednearthe
antennawirethathangsdownfromthemo-
tor. If the wire originates from under a light
lens, you will need to remove the lens to
accesstheprogrambutton.
“clear”
all
previously
programmed
HomeLink
buttons).
SIC2072
Ifyouhaveanyquestionsorarehavingdifficulty
programming your HomeLink buttons, please
3.
4.
Usingbothhands,simultaneouslypressand
holdboththeHomeLink buttonyouwantto
program and the hand-held transmitter but-
ton.
DONOTreleasethebuttonsuntilstep4has
beencompleted.
refer
to
the
HomeLink
website
at:
www.homelink.comorcall1-800-662-6200.
PROGRAMMINGHomeLink FOR
CANADIANCUSTOMERS
NOTE:
Once you have pressed and released the
programbuttononthegaragedooropen-
er’smotorandthe“traininglight”islit,you
have30secondsinwhichtoperformstep
Hold down both buttons until the indicator
light on the HomeLink flashes, changing
from a “slow blink” to a “rapidly flashing
blink”. This could take up to 90 seconds.
Whentheindicatorlightflashesrapidly,both
buttonsmaybereleased.Therapidlyflashing
light indicates successful programming. To
activate the garage door or other pro-
grammed device, press and hold the pro-
Priorto1992,D.O.C.regulationsrequiredhand-
held transmitters to stop transmitting after 2
seconds.Toprogramyourhand-heldtransmitter
to HomeLink , continue to press and hold the
7.
convenience to assist when performing
thisstep.
Use the help of a second person for
HomeLink
button (note steps 2 through 4
under “Programming HomeLink ”) while you
press and re-press (“cycle”) your hand-held
transmitter every 2 seconds until the indicator
7. Quickly within 30 seconds of pressing and
releasing the garage door opener program
Instrumentsandcontrols 2-41
| Categories | Nissan Manuals, Nissan Murano Manuals |
|---|---|
| Tags | Nissan Murano 3.5 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)