systemassoonaspossible.
(MIL)” in the “2. Instrument and controls”
section.Thiswilloccurevenifallelectrical
circuits are functioning properly. In this
case,turntheignitionkeyOFFandwaitfor
Acceleratordownshift
—
InDposition—
3
seconds. Then turn the key back to the
For rapid passing or hill climbing, fully depress
theacceleratorpedaltothefloor.Thisshiftsthe
transmissiondownintolowerrange,depending
onthevehiclespeed.
ONposition. The vehicle should return to
its normal operating condition. If it does
not return to its normal operating condi-
tion, have your NISSAN dealer check the
transmissionandrepairifnecessary.
Highfluidtemperatureprotection
mode
WARNING
This transmission has a high fluid temperature
protection mode. If the fluid temperature be-
comes too high (for example, when climbing
steep grades in high temperature with heavy
loads, such as when towing a trailer), engine
power and, under some conditions, vehicle
speedwillbedecreasedautomaticallytoreduce
the chance of transmission damage. Vehicle
speed can be controlled with the accelerator
pedal,butthevehiclemaynotaccelerateabove
approximately40to50MPH(65to80km/h).
Whenthehighfluidtemperatureprotec-
tionmodeorfail-safeoperationoccurs,
vehicle speed may be gradually re-
duced.Onhighways,thereducedspeed
may be lower than other traffic which
couldincreasethechanceofacollision.
Be especially careful when driving. If
necessary,pulltothesideoftheroadat
asafeplaceandallowthetransmission
toreturntonormaloperation,orhaveit
repairedifnecessary.
SSD0290
Shiftlockrelease
If the battery charge is low or discharged, the
selector lever may not be moved from the P
(Park) position even with the brake pedal de-
pressed.
To move the selector lever, depress the brake
pedal,removethecoverusingasuitabletooland
pushtheshiftlockreleasebutton.Theselector
lever can be moved to N (Neutral). This allows
the vehicle to be moved if the battery is dis-
charged.
Fail-safe
Ifthevehicleisdrivenunderextremecon-
ditions, such as excessive wheel spinning
andsubsequenthardbraking,thefail-safe
system may be activated. The MIL may
come on to indicate the fail-safe mode is
activated,see“Malfunctionindicatorlamp
If the selector lever cannot be moved out of P
(Park),haveyourNISSANdealerchecktheCVT
Startinganddriving 5-13
| Categories | Nissan Manuals, Nissan Murano Manuals |
|---|---|
| Tags | Nissan Murano 3.5 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)