16
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Atthetimeofpurchase,theoriginalownerisprovided 2. Insertthefirstvalidkeyintotheignitionswitch.Turn
with a four-digit Personal Identification Number (PIN). the ignition switch to the ON position for at least three
Keep the PIN in a secure location. This number is seconds, but no longer than 15 seconds. Then, turn the
requiredforauthorizeddealerreplacementofkeys.Du- ignitionswitchtotheLOCKpositionandremovethefirst
plication of keys may be performed at an authorized
dealer or by following the customer key programming
procedure. This procedure consists of programming a
blank key to the vehicle electronics.Ablank key is one
thathasneverbeenprogrammed.
key.
3.
Insert the second valid key into the ignition switch.
Turn the ignition switch to the ON position within
15
seconds. After 10 seconds, a chime will sound. In
addition, the Vehicle Security Light will begin to flash.
NOTE:
When having the Sentry Key Immobilizer Turn the ignition switch to the LOCK position and
System serviced, bring all vehicle keys with you to an removethesecondkey.
authorizeddealer.
4.
Insert a blank Sentry Key into the ignition switch.
Customer Key Programming
Turn the ignition switch to the ON position within
If you have two valid Sentry Keys, you can program 60seconds.After10seconds,asinglechimewillsound.
new Sentry Keys to the system by performing the Inaddition,theVehicleSecurityLightwillstopflashing.
followingprocedure:
CuttheadditionalSentryKeyTransponderblank(s)
tomatchtheignitionswitchlockcylinderkeycode.
To indicate that programming is complete, the Vehicle
Security Light will turn on again for three seconds and
thenturnoff.
1.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)