326
STARTING AND OPERATING
vehicle stopped or in motion. If the vehicle is stopped, 3. Whilestillrolling,movethetransfercaseswitchtothe
theignitionswitchmustbeintheONpositionwiththe desiredposition.
engine either OFF or RUNNING. This shift cannot be
4.
flashing),shiftthetransmissionintogear.
After the desired position indicator light is on (not
completediftheignitionswitchisintheACCposition.
2WDor4WDAutoto4WDLow
Whenshiftingintooroutof4WDLOW,somegearnoise
AlternateProcedure
maybeheard.Thisnoiseisnormalandisnotdetrimental 1. Bringthevehicletoacompletestop.
tothevehicleoritsoccupants.
2.
With the ignition switch in the ON position and the
Shifting can be performed with the vehicle rolling 2 to engine OFF or RUNNING, shift the transmission into
3
mph(3to5km/h)usingthe“PreferredProcedure”or
NEUTRAL.
completelystoppedusingthe“AlternateProcedure.”
3.
4.
Movethetransfercaseswitchtothedesiredposition.
After the desired position indicator light is on (not
PreferredProcedure
1.
2
WiththeengineRUNNING,slowthevehiclespeedto flashing),shiftthetransmissionintogear.
to3mph(3to5km/h).
NOTE: Steps1and2inthe“PreferredProcedure”and
the “Alternate Procedure” are requirements for shifting
thetransfercase.Iftheserequirementsarenotmetprior
to attempting the shift or while the shift attempt is in
2.
ShiftthetransmissionintoNEUTRAL.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)