108
UNDERSTANDINGTHEFEATURESOFYOURVEHICLE
4.
positions.
Adjustthebrakeandacceleratorpedalstothedesired
10. Inserttheignitionkeyandturntheignitionswitchto
theONposition.
5.
to10AMand10FMstationscanbeset).
Turnontheradioandsettheradiostationpresets(up
11. SelectЉRemoteLinkedtoMemoryЉintheElectronic
Vehicle Information Center (EVIC) and enter ЉYesЉ or
select ЉUse Factory SettingsЉ from the EVIC and enter
ЉYesЉ. Refer to “Electronic Vehicle Information Center
(EVIC)—CustomerProgrammableFeatures”inSection
4formoreinformation.
6.
removethekey.
Turn the ignition switch to the OFF position and
7.
Press and release the SET (S) button located on the
driver’sdoor.
12.
Repeat the above steps to set the next memory
8.
Within5seconds,pressandreleasememorybutton1
positionusingtheothernumberedmemorybuttonorto
link another Remote Keyless Entry transmitter to
memory.
or 2 on the driver’s door. The next step must be per-
formed within 5 seconds if you desire to also use a
Remote Keyless Entry transmitter to recall memory po-
sitions.
MemoryPositionRecall
NOTE: The vehicle must be in Park to recall memory
positions.Ifarecallisattemptedwhenthevehicleisnot
in Park, a message will be displayed in the Electronic
VehicleInformationCenter(EVIC).
9.
transmitters.
Press and release the “Lock” button on one of the
| Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)