PEUGEOT TRANSPONDER SYSTEMS
Make - PEUGEOT
Model - PARTNER
Years – 1998-2000 & 2000 ⇒
Immob. System:
IMMO 1 & BSI-2 (after 2000)
Software Card: PSA
Diagnostic Equipment: RT3
Diagnostic Lead:
OBD-II & OBD-II+Yellow pod
(after 2000)
Maximum Keys: 5
JMA Key Blank: SIX-3.P3
Code Series: DIRECT
Transponder Type: TP12
TRS-4000 Copy Code: NO
Pin Code Required:
YES, the pin is of 4 characters,
being able to be these letters
and numbers
In PEUGEOT PARTNER the OBDII socket is located in
the zone of pedals.
Technical Information
Before The “Crypto Era” the PARTNER worked with Transponder Fix code (TP01) and it was possible to clone
with TRS-4000.Later this model can started with BSI-2 system, from 2000 this model use the Transponder TP12
for the BSI-2 equipped cars
ATTENTION: the time that is arranged between key and key for the codification is very short (aprox. 3
seconds). Should be quite quick in the keys exchange in the Ignition. When the process of keys codification be
finished, should be expected around 10 minutes before testing the keys.
If for some cause, after keys codification, the keys remote control lost the properties, you must only introduce
into the ignition the Codified key and later put ON the ignition and then push the lock button of the remote,
immediately you will be able to hear the doors activation.
(0 votes, average: 0 out of 5)
Comments are closed.