AUDI TRANSPONDER SYSTEMS
Make - AUDI
Model – A4
Years - 2003
Immobiliser System: 2
Software Card: V.A.G
Diagnostic Equipment RT3:
Diagnostic Lead:
OBD-II + BLUE POD
Maximum Keys: 8
JMA Key Blank: HU-HAA.P
CODE SERIES:HAA 1-6000
TRANSPODER TYPE
Megamos Crypto TP08. Original
Other valid replacements = TP11
PIN CODE REQUIRED:
YES
And always the available pin is
4
you 7 digits, you must convert
to 4 digits with CONVERTER.
digits, the Dealer can give
In A-4 from 2002 in advance, the OBDII Socket is located below
steering column under dash panel and is now common on most
Audi vehicles.
Technical Information
The transponder immobiliser system fitted to these vehicles is known as VAG system 2 and a
maximum of eight keys can be coded to the immobiliser system. Key blanks and transponders
standard and remote are available from your JMA distributor. When programming keys into
the immobiliser system you will require a 4 pin or 7 pin code which can be programmed into
the immobiliser system using your RT3 Diagnostic machine and software. On some VAG
vehicles you may be able to extract the four pin code from the immobiliser system using the
Pin Code bypass software which is being constantly updated and will be available as an
update to cover 70% of the V.A.G range. When obtaining pin codes from the dealership these
will be supplied in a 7 digit format which can be converted to the 4 pin code with the software
pin-code disc supplied and is unique to the RT3 system.
(0 votes, average: 0 out of 5)
Comments are closed.