AUDI TRANSPONDER SYSTEMS
Make – AUDI
Model – A3
Years – 1998-2002
Immobiliser System: 2
Software Card: VAG
Diagnostic Equipment: RT3
Diagnostic Lead:
-
+
Maximum Keys: 8
JMA Key Blank: HU-HAA.P
Code Series: HAA 1-6000
Transponder Type: In the
first moment TP03 fix code. Later
Megamos Crypto TP08. Original
Other valid replacements = TP11
Pin Code Required: YES
And always the available pin is
4 digits, the Dealer can give you
7
digits, you must convert to 4
In A-3 the diagnosis socket could be in two differents
places, 1) In the front console and is covered for one small
cover. 2) just near to the handle that opens the engine vain,
and is purple socket.
digits with CONVERTER
Technical Information
The transponder immobiliser system fitted to these vehicles is known as VAG system 2 and a
maximum of eight keys can be coded to the immobiliser system. Key blanks and transponders
standard and remote are available from your JMA distributor. When programming keys into the
immobiliser system you will require a 4 pin or 7 pin code which can be programmed into the
immobiliser system using your RT3 Diagnostic machine and software. On some VAG vehicles you
may be able to extract the four pin code from the immobiliser system using the Pin Code bypass
software which is being constantly updated and will be available as an update to cover 70% of the
V.A.G range. When obtaining pin codes from the dealership these will be supplied in a 7 digit format
which can be converted to the 4 pin code with the software pin-code disc supplied and is unique to the
RT3 system.
(0 votes, average: 0 out of 5)
Comments are closed.