VOLVO TRANSPONDER SYSTEMS
Make - VOLVO
Model –V40
Years – 1998-2003
Immob. System: IMMO 2
Software Card: VOLVO
Diagnostic Equipment: RT3
Diagnostic Lead: OBD-II
Maximum Keys: 6
JMA Key Blank: HU-DH.P2
Code Series: DH 6000-8000
Transponder Type: PHI-Cry
TRS-4000 Copy Code: NO
Pin Code Required: YES
In VOLVO V40 and S40 the OBD-II diagnosis socket is
placed under the steering wheel.
Technical Information
The VOLVO immobiliser system can program a maximum of six keys into the immobiliser system
and four remotes. There are two basic systems covering different models and are known as
immobiliser system 1 and immobiliser system 2.The software can add additional keys or erase keys
and there is also the facility to count total amount of keys before you commence programming. When
performing key programming always use the OBD-II diagnostic lead together with the VOLVO
software card provided in your JMA RT3 diagnostic kit, The system requires a 4 digit pin code for
key programming and is vin specific this is available from your VOLVO car dealership. Once the key
has been programmed you can program a remote using a special sequence this information is
available to RT3 users only. All keys and transponders are available from your JMA distributor
together with more technical information. The software is designed for cars which do not use the
VOLVO VARDIS immobiliser system which is currently used on all models above the year 2000.This
software upgrade will be available soon.
(0 votes, average: 0 out of 5)
Comments are closed.