FORD TRANSPONDER SYSTEMS EUROPEAN
Make - FORD
Model -TRANSIT
Years – 1996-1997
Immobiliser System: PATS 1
Software Card: FORD EURO
Diagnostic Equipment: RT3
Diagnostic Lead: OBD-II
Maximum Keys: 16
JMA Key Blank: FO-6.P
Code Series: DIRECT TIBBE
Transponder Type:
TEXAS fix code TP02 the
original key with “red top”
Copy Code: NO
Pin Code Required: NO
The time is the PIN CODE in
FORD
cars,
you
must
wait
In the FORD TRANSIT 96, the connector is OBD II type and is
found just in the fuse box or fuse cabinet of the van, near to the
relays.
between 10 to 20 minutes for
connection.
Technical Information
The codifying process can be achieved by the user without the RT-3 Systems, If the user has the
master key (one red key) for cars with PAT 1 system or for cars with PAT 2 System with two original
keys. In both cases is Recommendable to read the User´s handbook and look for one chapter about
keys codification or Immobilizer system.
ATTENTION: Is necessary to codify at least 1 key for cars with PAT 1, and at least 2 keys for cars
with PAT 2. If you need only to add one key, it isn´t necessary to codify the previous, the system will
maintain its codes. The protection (PIN CODE) of the key codifying process is usually programmed
by time. In this case it´s necessary to wait for from 10 to 23 minutes to get access guaranteed, and
obviously it is NOT necessary any PIN CODE to agree.
(0 votes, average: 0 out of 5)
Comments are closed.