VW TRANSPONDER SYSTEMS
Make - VW
Model – POLO
Years – 1998-2002
Immobiliser System: VAG 2
Software Card: VAG
Diagnostic Equipment: RT3
Diagnostic Lead:
OBD-II+BLUE POD
Maximum Keys: 8
JMA Key Blank:HU-HAA.P1
Code Series: HAA 1-6000
Transponder Type:
TP10 (98-00)later TP14 (00-02)
OBD II Diagnostic Port
TRS-4000 Copy Code: NO
Pin Code Required: YES
And always the available pin is
4
digits, the Dealer can give
In POLO 99 the diagnosis socket is placed under one small
plastic cover just in close to the lighter and the ashtray.
you 7 digits, you must convert
to 4 digits with CONVERTER
Technical Information
The transponder immobiliser system fitted to these vehicles is known as VAG system 2 and a
maximum of eight keys can be coded to the immobiliser system. Key blanks and transponders
standard and remote are available from your JMA distributor. When programming keys into the
immobiliser system you will require a 4 pin or 7 pin code which can be programmed into the
immobiliser system using your RT3 Diagnostic machine and software. On some VAG vehicles you
may be able to extract the four pin code from the immobiliser system using the Pin Code bypass
software which is being constantly updated and will be available as an update to cover 70% of the
V.A.G range. When obtaining pin codes from the dealership these will be supplied in a 7 digit format
which can be converted to the 4 pin code with the software pin-code disc supplied and is unique to the
RT3 system. Remotes can be programmed using a special sequence. Any keys not present at the time
of key programming will be erased from the system and always use the blue pod when programming.
(0 votes, average: 0 out of 5)
Comments are closed.