SKODA TRANSPONDER SYSTEMS
Make – SKODA
Model – FABIA
Years - 2000 ⇒
Immobiliser System: 2
Software Card: V.A.G
Diagnostic Equipment: RT3
Diagnostic Lead:
OBD-II+BLUE POD
Maximum Keys: 8
JMA Key Blank:HU-HAA.P1
Code Series: HAA:1-6000
Transponder Type: TP08
TRS-4000 Copy Code: NO
OBD II Diagnostic Port
Pin Code Required: YES
And always the available pin is
4 digits, the Dealer can give you
In SKODA FABIA the diagnosis socket is placed in the fuse
box, just behind one plastic cover.
7
digits, you must convert to 4
digits with CONVERTER
Technical Information
The transponder immobiliser system fitted to these vehicles is known as VAG system 2 and a
maximum of eight keys can be coded to the immobiliser system. Key blanks and transponders
standard and remote are available from your JMA distributor. When programming keys into the
immobiliser system you will require a 4 pin or 7 pin code which can be programmed into the
immobiliser system using your RT3 Diagnostic machine and software. On some VAG vehicles you
may be able to extract the four pin code from the immobiliser system using the Pin Code bypass
software which is being constantly updated and will be available as an update to cover 70% of the
V.A.G range. When obtaining pin codes from the dealership these will be supplied in a 7 digit format
which can be converted to the 4 pin code with the software pin-code disc supplied and is unique to the
RT3 system. Remotes can be programmed using a special sequence. Any keys not present at the time
of key programming will be erased from the system and always use the blue pod when programming.
(0 votes, average: 0 out of 5)
Comments are closed.