FORD TRANSPONDER SYSTEMS EUROPEAN
Make - FORD
Model -TRANSIT
Years – 1998-2000
Immobiliser System: PATS 2
Software Card: FORD EURO
Diagnostic Equipment: RT3
Diagnostic Lead: OBD-II
Maximum Keys: 8
JMA Key Blank: FO-6.P
Code Series: DIRECT TIBBE
Transponder Type:
TP02 (Fix code) “red top”
Copy Code: NO
Pin Code Required: NO
The time is the PIN CODE in
FORD
between 10 to 20 minutes for
connection.
cars,
you
must
wait
In the FORD TRANSIT 98, the connector is OBD II type and is
found just in the fuse box or fuse cabinet of the van, near to the
relays.
Technical Information
The codifying process can be achieved by the user without the RT-3 Systems, If the user has the at
least two original keys. In this case is Recommendable to read the User´s handbook and look for one
chapter about keys codification or Immobilizer system. Remenber that for this car there are
differences between Diesel models and petrol models, and also that the in Software cards you must
choose the option of PATS 1 UPDATE.
ATTENTION: Is necessary to codify at least 1 key for cars with PAT 1, and at least 2 keys for cars
with PAT 2. If you need only to add one key, it isn´t necessary to codify the previous, the system will
maintain its codes. The protection (PIN CODE) of the key codifying process is usually programmed
by time. In this case it´s necessary to wait for from 10 to 23 minutes to get access guaranteed, and
obviously it is NOT necessary any PIN CODE to agree.
(0 votes, average: 0 out of 5)
Comments are closed.