AUDI TRANSPONDER SYSTEMS
Make - AUDI
Model – A6
Years - 1997-March 2004
Immobiliser System: 2
Software Card: V.A.G
Diagnostic Equipment: RT3
Diagnostic Lead:
-
+
Maximum Keys: 8
JMA Key Blank: HU-HAA.P
Code Series: HAA 1-6000
Transponder Type: TP01 in
later
the
first
moment
Megamos Crypto TP08
TRS-4000 Copy Code:
YES/NO
Pin Code Required: YES
In A-4 from 2002 in advance, the OBDII Socket is located below
steering column under dash panel and is now common on most
Audi vehicles.
And always the available pin is
4 digits, the Dealer can give you
7
digits, you must convert to 4
digits with CONVERTER
Technical Information
The transponder immobiliser system fitted to these vehicles is known as VAG system 2 and a
maximum of eight keys can be coded to the immobiliser system. Key blanks and transponders
standard and remote are available from your JMA distributor. When programming keys into the
immobiliser system you will require a 4 pin or 7 pin code which can be programmed into the
immobiliser system using your RT3 Diagnostic machine and software. On some VAG vehicles you
may be able to extract the four pin code from the immobiliser system using the Pin Code bypass
software which is being constantly updated and will be available as an update to cover 70% of the
V.A.G range. When obtaining pin codes from the dealership these will be supplied in a 7 digit format
which can be converted to the 4 pin code with the software pin-code disc supplied and is unique to the
RT3 system.
(0 votes, average: 0 out of 5)
Comments are closed.