RT-3 USER GUIDE____________________________________________________
Normally, the electromagnetic fields don’t harm the equipment but they can cause
bad functioning and loss of the information kept in memory.
Unplug and store away the appliance in the supplied case if it is not in use.
Never use different leads than the supplied ones. Verify the connection of the leads
before its use.
The manual of each brand details the functioning of the program, and the location
of the connector. Read the procedure to follow as well as he annucements in
relation to the use of the terminal and the codification of keys.
1.4
IDENTIFICATION
Inside the terminal a serial number is inscribed. Once the appliance has been switched
on the terminal’s programming code is displayed.
Any of these references is valid to identify the terminal and its specification is needed in
case of technical consult and software updating.
1.4.1 THE MAIN ELEMENTS
The terminal consist of an alphanumerical retroiluminated screen, made up by 4
columns of 29 characters each with variable contrast adjusted in factory.
The input information is carried out by a mechanical keyboard fitted with a waterproof
membrane of 4 keys.
The external connection is done through DB15 connector to which the diagnostic wire
is connected.
1.4.2 TECHNICAL INFORMATION
Supply
9-18 V continuos tension
300-400 mA
Waste
Temperature of
Dimensions
Weight (without wires)
0-50ºC
460mm x 180mm x 340mm
1.5 Kg
4
(0 votes, average: 0 out of 5)
Comments are closed.