NISSAN TRANSPONDER SYSTEMS
Make – NISSAN
Model – PRIMERA
Years - 1999-2001
Immobiliser System: NATS 2
Software Card: NISSAN
Diagnostic Equipment: RT3
Diag. Lead: NISSAN PRE-98
Maximum Keys: 4
JMA Key Blank: DAT-15.P2
Code Series:
Transponder Type: TP13
TRS-4000 Copy Code: NO
Pin Code Required: NO
The diagnosis connector is NISSAN
PRE-98 type and is located in the fuse
box, as you can see in the pictures. Is
necessary to connect the red pincer of
the PRE-98 lead to the positive
terminal of the battery
Technical Information
The INMO System fitted to these cars is known as NATS and there are generally two systems in use NATS 2 and
5.On
NATS 2 cars the diagnostic lead is not OBD-II but a special lead supplied in your RT3 kit for pre 2000
vehicles. This lead also needs to be attached to the vehicles battery power supply positive in order to power the
diagnostic unit. There is no pin code required for programming and a maximum of 4 keys can be coded to the
INMO system, all keys required for coding need to be programmed at the same time as the system automatically
erases keys not present. In some countries a password fixed is required for key programming this information is
available to RT3 users only. With the OBD-II diagnostic system some vehicles require a VIN specific pin code
which at present must be obtained from your Nissan dealership. The 2000 year upward vehicles with VIN specific
codes can be coded to except a maximum of five keys. Key blanks and transponders are all available from your
JMA distributor. New software being developed at present will be available soon to bypass the VIN specific pin
codes.
(0 votes, average: 0 out of 5)
Comments are closed.