UNDERSTANDING YOUR INSTRUMENT PANEL
181
GASCAP
means the engine oil change interval may fluctuate
dependentuponyourpersonaldrivingstyle.
Ifthevehiclediagnosticsystemdetectsaleakorchange
intheevaporativesystem,orthefuelfillercapisloose,
improperlyinstalled,ordamaged,thewords“GASCAP”
will display in the odometer. If this occurs, tighten the
fuel filler cap properly and press the odometer reset
button to turn off the “GASCAP” message. (Refer to
“Onboard Diagnostic System — OBDII” in Section 7 of
this manual for more information). If the problem con-
tinues,themessagewillappearthenexttimethevehicle
is started. See your authorized dealer service center as
soonaspossible.
Unlessreset,thismessagewillcontinuetodisplayeach
timeyouturntheignitionswitchtothe“ON”position.
Toturnoffthemessagetemporarily,pressandreleasethe
TripOdometerbuttonontheinstrumentcluster.Toreset
the oil change indicator system (after performing the 4
scheduled maintenance) perform the following proce-
dure:
1. TurntheignitionswitchtotheONposition(Donot
starttheengine).
CHAngEOIL
2. Fully depress the accelerator pedal slowly 3 times
within10seconds.
Your vehicle is equipped with an engine oil change
indicatorsystem.The“CHAngEOIL”messagewillflash
in the instrument cluster odometer for approximately
3.
TurntheignitionswitchtotheLOCKposition.
12
the next scheduled oil change interval. The engine oil
change indicator system is duty cycle based, which
secondsafterasinglechimehassoundedtoindicate
NOTE: If the indicator message illuminates when you
startthevehicle,theoilchangeindicatorsystemdidnot
reset.Ifnecessaryrepeatthisprocedure.
| Categories | Chrysler Manuals, Chrysler Sebring Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)