WHAT TO DO IN EMERGENCIES
407
3.
Align the valve notch in the wheel cover with the
7. For vehicles equipped with center caps, install the
center cap by hand. Do not use a hammer or excessive
forcetoinstallthecentercap.
valve stem on the wheel. Install the cover by hand,
snappingthecoveroverthetwolugnuts.Donotusea
hammerorexcessiveforcetoinstallthecover.
8.
Stowthejack,tools,andsparetire.Makesurethebase
4.
Install the remaining lug nuts with the cone shaped
ofthejackfacestherearofthevehiclebeforetightening
downthefastener.
endofthenuttowardthewheel.Lightlytightenthelug
nuts.Toavoidtheriskofforcingthevehicleoffthejack,
do not tighten the lug nuts fully until the vehicle is
loweredtotheground.
WARNING!
Aloosetireorjackthrownforwardinacollisionor
hard stop could endanger the occupants of the ve-
hicle.Alwaysstowthejackpartsandthesparetirein
theplacesprovided.
5.
handlecounterclockwise.
Lower the vehicle to the ground by turning the jack
6
6.
Finish tightening the lug nuts. Push down on the
wrenchwhiletighteningforincreasedleverage.Alternate
lug nuts until each nut has been tightened twice. The
correcttightnessofeachlugnutis100ft/lb.(135N·m).If
indoubtaboutthecorrecttightness,havethemchecked
withatorquewrenchbyyourauthorizeddealerorata
servicestation.
| Categories | Chrysler 300 Manuals, Chrysler Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)