n
DEFENDER
ELECTRICAL EQUIPMENT
ALTERNATOR
Service Repair No. 86.10.02
Remove and refit
1.
2.
Disconnect the battery.
Remove the air cleaner, s ee operation
Remove the intercooler top hose assembly t o
the inlet manifold.
4.
Remove the intercooler bottom hose assembly
to the compressor housing.
Slacken the adjustment strap pivot bolt.
6
7.
8.
. Remove the adjustment strap clamp bolt.
Remove the alternator two pivot bolts.
Release the drive belt from the alternator
pulley. Note, to renew the drive belt, the
power assisted steering pump and air
conditioning compressor drive belts must first
be removed.
9.
Disconnect the electrical leads and remove t he
alternator.
Refitting
Connect the electrical leads t o the alternator
before placing it in position on the common
bracket.
11.
Secure the alternator with the two pivot bolts
and nuts, but leave slack at this stage.
Fit the adjustment strap clamp bolt and leave
slack.
13.
14.
Fit the drive belt to the pulleys.
Tension the drive belt by levering the
altemator away from the engine, taking care
not t o damage the alternator, and then tighten
adjustment strap
The
is
correct when t he belt can be deflected
at the the mid-point of the longest
run between t he pulleys.
Tighten the adjustment strap pivot bolt and the
altemator two pivot nuts and bolts.
17.
Reconnect the battery, run the engine and
recheck the fan drive belt tension.
97
Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
---|---|
Tags | Land Rover |
Model Year | 1990 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 90, 110, 130 Td5, Tdi, V8 |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)