DEFENDER
FUEL SYSTEM
...
FUEL INJECTIONPUMP
Service Repair No.
Remove and refit
Special tools:-
Flywheel timing pin
LST 128
Pump gear retaining tool
Pump timing pin
LST
LST
1.
Remove the bonnet and disconnect t he
battery.
Drain the cooling system.
3.
Remove the fan and viscous coupling assembly
see operation 26.25.19
4.
Remove the fan cowl see operation 26.25.11.
Disconnect the lower cooling hose from the
waterpump.
9.
10.
Remove the injector pump h ub blanking plate.
Insert the injector pump timing pin LST
Through the "U" shaped slot in the pump hub
into the pump body. Ensure that the pin fits
easily and is fully inserted.
6
. Remove t he oil filler cap so that t he position of
number o ne cylinder valve rockers can be seen
to assist in obtaining T.D.C.
7.
Tum the crankshaft to align the
mark on
the crankshaft damper with the the w eb on the
front cover plate. At the same time check that
the valves of number o ne cylinder are closed.
LST
Remove the blanking plug from the bottom of
the flywheel housing and fit the timing pin LST
Check that the pin can be inserted into
the appropriate slot in the flywheel. Note that
there are two slots in the flywheel the
narrowest one being that which determines
T.D.C. for this engine.
Continued
82
| Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
|---|---|
| Tags | Land Rover |
| Model Year | 1990 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 90, 110, 130 Td5, Tdi, V8 |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)