1990 Land Rover Defender 90, 110, 130 Td5, Tdi, V8 Workshop Manual

FUEL   SYSTEM
DEFENDER
TURBO CHARGER
,
Service Repair    No.
Remove  and    refit
Remove the bonnet     and disconnect t   he
battery.
2.
3.
Remove the turbo    charger heat shield.
Disconnect the exhaust front      pipe from  the
turbo  charger  elbow.
4.
Release the front exhaust    pipe from   the
support bracket    attached t   o  the cylinder  block.
Remove t he five nuts and     remove the elbow
from  the turbo   charger.
5.
6
.  Remove the air inlet    hose from the air    cleaner
and  turbo charger.
7.
8.
Disconnect, from   the turbo charger,      the
bottom   hose from t  he intercooler.
Remove t he boost    pressure   pipe from  the
turbo
piece.
9.
10.
Slacken the turbo charger     oil feed   pipe  clamp.
Disconnect the   oil  supply  pipe from the turbo
charger centre housing.
Release the  oil return   drain  pipe from the
turbo  charger.
Remove t he four nuts and     lift  the turbo
charger from the exhaust      manifold  and  retrieve
the steel joint   washer.
Refitting
13.
Fit  the steel joint   washer  to the t   o the exhaust
manifold
86
Product Specification
CategoriesLand Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90
Tags
Model Year1990
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 102 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 90, 110, 130 Td5, Tdi, V8
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field