1990 Land Rover Defender 90, 110, 130 Td5, Tdi, V8 Workshop Manual

DEFENDER
ENGINE
Removing  cylinder head
8.
Evenly slacken and remove the eighteen bolts
retaining  the cylinder  head  and  lift  the  cylinder
head  from  the cylinder  block  and  remove  the
gasket.
See cylinder head     overhaul o   r see fitting cylinder
head
Front  cover plate    or seal remove
Front  pulley a  nd damper.
5.
Release  the four bolts   and  remove the
crankshaft pulley   from  the damper.
M
Note:-
at this stage t    he cam
followers may    be removed for     inspection.
See Cam   follower   removal
FRONT COVER   OIL
BE
HA
See radiator
Water  pump remove.
If  necessary  remove the viscous    coupling
complete, with   the  fan, from   the water  pump
spindle,  using  a cranked open-ended spanner,
noting  that  it  has a left-handed thread.
.
..
2.
Remove the   four  screws, t o release the pulley
from  the water pump hub.
3.
If  necessary  release  the two Jubilee clips   and
remove the by  -pass  hose.
Evenly release  and remove   the six  bolts  and
one nut t  o remove the water     pump from the
front cover plate.
See water   pump inspection      and fitting.
4
1
Product Specification
CategoriesLand Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90
Tags
Model Year1990
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 102 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 90, 110, 130 Td5, Tdi, V8
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field