DEFENDER
ENGINE
CAMSHAFT
.....
.
.. .
.
Service RepairNo. 12.13.02.
Remove and refit
1.
Remove the bonnet and disconnect the
battery.
2.
Disconnect the radiator bottom hose and allow
the coolant to drain and reconnect the hose.
Remove the radiator top coolant hose,
Remove the fan and viscous coupling
assembly, see operation 26.25.1 9. instructions
3.
4.
4
to 7.
5.
6.
Remove the fan cowl.
Remove the radiator, see operation 26.40.01.
instructions 3 to 5 and 7 to
Remove the air cleaner, see operation
7.
11.
12.
13.
Remove the exhaust and inlet manifolds, s ee
operation 30.15.01 instructions 4 to 15.
Remove the cylinder head, see operation
instructions 6 to 7 and 9 to
Now follow the instructions in ENGINE
OVERHAUL section 12. SEE INDEX:-
Operations with engine installed in vehicle
19.1 0.01.
Remove the alternator, see operation
instruction 5 to 9.
Remove the power assisted steering p ump
bracket, see operation
to 9.
Remove the air conditioning compressor,
where fitted, and t he mounting bracket
together with the platform secured by four
socket headed bolts. Note that t he hoses must
not be removed from the compressor but it
instructions 1 to 5.
9.
instructions
10.
Refitting
should be carefully secured to one side.
.
14.
Follow the instructions for fitting the camshaft
and assembly of the engine u p to the fitting of
the rocker cover, crankshaft damper and
pulley.
Fit the inlet and exhaust manifolds see
operation 30.15.01 instructions 1 6 to 24 and
27.
...
16. Fit the power assisted steering pump bracket
and secure and the four bolts.
Fit the power steering pump t o the bracket
with the single pivot bolt and clamp bolts.
Leave the bolts slack at this stage.
Fit the alternator t o the common bracket, see
operation
instructions 1 0 to 15.
19.
Where applicable, fit the air conditioning
compressor and tension the drive belt as
follows:- Move the compressor clockwise
about the pivot bolts (do not use a lever
against the pump) until the belt deflects 12
at the mid point of the run
between the compressor and crankshaft
pulleys . Tighten the pivot and clamp bolts.
the
contact with the belt or
belt and tighten the damper bolts.
is is
clear of the
31
| Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
|---|---|
| Tags | Land Rover |
| Model Year | 1990 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 90, 110, 130 Td5, Tdi, V8 |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)