ENGINE
DEFENDER
6
. Clean all the components then install both
gears into the body ensuring that the recessed
end of the driving gear is uppermost.
7.
Place a straight e dge across both gears as
illustrated to measure the e nd float of each
using a feeler gauge. Also check the gear
backlash and the clearance between the gears
and pump body. The correct clearances are
given in the data section.
8.
Examine the gear thrust face o n the pump
cover, any slight scratches may be erased by
rubbing on fine emery cloth on a flat surface.
Pump assembly.
9.
With gear
correct, lubricate and fit
the driven gear to t he spindle and install the
driving gear with the counter bored splined
end of the gear uppermost in the pump
housing.
10.
11.
Fit the cover locating it over the two dowels
and
secure with the four bolts until the
strainer is fitted.
Install the spring into the relief valve then
lubricate and insert the valve into the relief
valve bore retaining with the sealing washer
and plug.
Fit a new '0' ring t o the oil strainer pipe and
insert into t he pump body and loosely secure
with the lock washer and nut.
1
3. Secure the strainer bracket t o the pump body
and tighten the four screws. Tighten the
strainer pipe nut and secure with the lock tab.
14.
Insert t he pump drive shaft and check that the
gears are free to operate before refitting to the
engine.
72
Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
---|---|
Tags | Land Rover |
Model Year | 1990 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 90, 110, 130 Td5, Tdi, V8 |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)