.
26 COOLING SYSTEM
DEFENDER
WATER PUMP
Refitting
Service Repair No. 26.50.01
Remove a nd refit
9. Clean the water pump and front cover plate
mating faces.
Lightly grease a new gasket and place in
position on the cover plate.
11. Clean the threads of the water pump retaining
bolts and apply Loctite 572 thread lubricant
sealant to the threads of all the bolts.
12. Fit the pump to the engine and secure with
the six bolts and one nut in accordance with
the chart below. Tighten t he fixings evenly and
t o the correct torque.
1.
Remove the fan and coupling assembly
operation 2. 25.19.
Remove the fan cowl operation 26.25.11.
Slacken the fan belt tension and remove it
from t he pulley.
2.
3.
4.
Remove the four bolts securing pulley t o hub.
13.
Connect the bottom hose t o the water pump.
Fit the pulley t o the water pump hub and
secure with the four bolts.
15.
16.
17.
18.
Fit and tension the water
Fit the fan cowl.
Fit the fan and coupling assembly.
Check that all the coolant hose clips are tight
and refill the cooling system with the correct
concentration of water and anti-freeze, see
operation
belt.
19.
Connect the battery, run the engine and check
for coolant leaks.
5.
Remove the thermostat housing to water
pump hose.
6
. Disconnect the bottom hose from the water
7.
Remove the six bolts and o ne nut securing the
water pump to the front cover plate.
Remove the water pump and gasket.
8.
92
Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
---|---|
Tags | Land Rover |
Model Year | 1990 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 90, 110, 130 Td5, Tdi, V8 |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)