1990 Land Rover Defender 90, 110, 130 Td5, Tdi, V8 Workshop Manual

DEFENDER
ENGINE
2.
Insert  the tappet   guides into the cylinder
block,  retaining  each with   a new screw which
should  be  screwed in   sufficiently  to allow t he
rollers  and slides t  o  be installed.   Ensure t he
rollers are fitted   in  accordance with    any marks
made during removal.    New  rollers,  however,
may be  fitted  either way around.
Overhaul  and fitting  skew gear
1.  Remove the circlips   retaining  the skew gear
shaft t o the bearing   and  the  bearing  in  the
housing.
Press the bearing   and  shaft assembly from    the
housing  and  the shaft from t  he bearing.
3
.  Before  fitting the tappet     slides make sure t   he
oilways are clear   to the running    surface  of  the
roller and  the pushrod    seating.   insert  the the
tappet  slides with  the word    'FRONT'  or  'F'   t o
the front   of the engine.
Discard both   rubber
rings,  examine all
components especially the bearing      and  skew gear
for wear and  damage and   renew   if   necessary.
4.
Finally tighten  the screws t   o the correct torque
to secure the guides.
CAUTION:  If  the original  skew  gear  and
camshaft  are to be  re-used,   they  must  be
fitted  so that  the teeth   on  each,  mesh  in  the
original  position.  If either   the  skew  gear   or
the  camshaft  are renewed,   the  mating
component   must also  be  renewed.
Fitting skew  gear  bush.
Inspect  the skew gear bush     for wear  and  renew  if
necessary.
.
Insert  the bush   into t he cylinder   block and
secure with   a new screw   to the correct    torque.
Do  not  over tighten   as this  may damage t   he
bush.
Assembling
3
.  Press the bearing    into t he housing   and  secure
with the circlip.   Support the housing and press
the shaft into position    and  secure with    the
circlip.
4.
Fit  a new rubber
ring to the outside     of  the
<L
-
housing  and  to the intemal    annular  groove in
the shaft ready   for installation.
I
64
Product Specification
CategoriesLand Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90
Tags
Model Year1990
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 102 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 90, 110, 130 Td5, Tdi, V8
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field