DEFENDER
ENGINE
Removing f uel pump and side cover
Slacken back the guide locating screw so that
the end is below the bore of the guide.
20.
21.
Use a 6
key to release the fuel lift
pump t o gain access to the side cover
retaining bolts.
Release the six bolts and remove the cover
plate.
See fitting lift pump.
Remove front s ide cover plate
22.
Release the six bolts and remove the front side
cover plate complete with the crankcase
ventilation pipe.
2.
Using a length of thin wire with a hooked end
lift-out the slide.
3.
4.
With the same piece of wire remove the roller
Remove the guide locating screw and lift-out
the guide.
6
. As each assembly is removed number it, from
one to eight, for refitting to its original
location.
See fitting cam followers
M
Remove camfollowers
See cylinder h ead remove
CAUTION: The camfollers are solid rollers
held in position against t he cam by a slide
inside a fixed guide. If the guide is removed
before the roller, it is possible that t he
roller c an fall behind the camshaft and
become jammed. Furthermore the roller
could slip p ast t he cam and fall into t he
crankcase. I t is t herefore important to adopt
the following procedure for removal.
47
Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
---|---|
Tags | Land Rover |
Model Year | 1990 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 90, 110, 130 Td5, Tdi, V8 |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)