1990 Land Rover Defender 90, 110, 130 Td5, Tdi, V8 Workshop Manual

DEFENDER
ENGINE
.
I
TIMING BELT
Service  Repair No.   12.65.18
Renew
Disconnect   the battery.
2.
3.
4.
5.
Remove  the  fan and viscous   coupling
assembly,  see   operation
Slacken and  remove   the  power steering pump
drive belt,  see  operation   57.20.14.
Slacken  and  remove  the air  conditioning
compressor drive    belt.
Remove  the air conditioning    compressor   from
the mounting    bracket  but  d o  not detach  the
fluid hoses from   the compressor.     Move the
compressor aside taking     care not t  o strain the
hoses.
Assembling
6.
Remove  the compressor mounting      bracket
10.
11.
Fit  the front cover plate    using  a new gasket
and  a new gasket washer o   n the centre    bolt
boss.
Secure the cover with    the various   length  bolts
tightening  evenly t o the correct torque.       Refer
to the bolt    length  chart in  ENGINE   OVERHAUL
Using a new gasket    fit the water pump,    see
instructions  9 to 12 operation
12.
13.
14.
Connect  the hoses   to   the water pump.
Fit  the air conditioning    compressor bracket
mounting  platform  and secure with    the  four
socket headed    bolts.
15.
16.
Fit  the compressor    mounting      bracket.
Refer to ENGINE   OVERHAUL for the  correct
method  of  fitting the crank   shaft  damper.
Fit  the pulley t  o the  damper and evenly tighten
the four bolts   to the correct     torque.
17.
18.
Fit  the water pump pulley    and  secure with   the
four bolts.   Use a
bar  in  the hole
provided  to restrain   the pulley   while  tightening
the bolts.
7.
Using an
Allen  Key,  remove the four
19.
20.
21.
Fit  and tension the water
belt.
drive
socket headed    bolts  that  secure the
compressor bracket    mounting
front cover and    cover plate.
Remove  the water   pump and alternator drive
belt, s ee operation    86.10.02  insturctions   4 to
7.
to the
Fit  and  tension  the compressor drive belt.      SEE
OPERATION 12.13.02
Fit  and  tension the power    steering   pump drive
bel.
8.
Fit  the fan  cowl  into  position  but  d o  not
secure t  o the radiator   until the fan   is fitted.
Fit  the fan  and viscous   coupling  assembly  to
the water   pump spindle. Tighten    the left   hand
thread  to the   correct  torque   using  a tommy
bar in  the  hole  provided   in  the fan  pulley  to
restrain  the coupling.
9.
Remove  the hoses from    the water   pump.
NOTE:  From this  stage onwards reference
should  be  made t  o the  instructions   in  the
ENGINE  OVERHAUL  section  12.  SEE  INDEX:-
Operations  with  engine   installed   in vehicle.
be
the
24.
Secure the fan
to the radiator    with  the
point when   the timing   belt  has  been  fitted  and
the engine and injector pump are correctly
timed.
two nuts and fit   the  top hose.
35
Product Specification
CategoriesLand Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90
Tags
Model Year1990
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 102 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 90, 110, 130 Td5, Tdi, V8
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field