THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
17
SentryKeyProgramming
CAUTION!
If you have two valid Sentry Keys, you can program
new Sentry Keys to the system by performing the
followingprocedure:
Always remove Sentry Keys from the vehicle and
lockalldoorswhenleavingthevehicleunattended.
2
1.
tomatchtheignitionswitchlockcylinderkeycode.
CuttheadditionalSentryKeyTransponderblank(s)
Atthetimeofpurchase,theoriginalownerisprovided
with a four-digit Personal Identification Number (PIN).
This PIN is required for replacement of keys by an
authorized dealer. Duplication of keys must be per-
formedatanauthorizeddealer.Thisprocedureconsists
ofprogrammingablankkeytothevehicleelectronics.A
blankkeyisonewhichhasneverbeenprogrammed.
2. Insertthefirstvalidkeyintotheignitionswitch.Turn
the ignition switch to the ON position for at least three
seconds, but no longer than 15 seconds. Then, turn the
ignitionswitchtotheLOCKpositionandremovethefirst
key.
NOTE:
Systemserviced,bringallvehiclekeyswithyoutothe
authorizeddealer.
When having the Sentry Key Immobilizer
3. Insert the second valid key into the ignition switch.
Turn the ignition switch to the ON position within
15 seconds. After 10 seconds, a chime will sound. In
addition, the Vehicle Security Light will begin to flash.
Turn the ignition switch to the LOCK position and
removethesecondkey.
| Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)