244
STARTINGANDOPERATING
shifting. This will allow full engagem ent of the new ly
selected position. Apply a constant force when shifting
the transfer case lever.
completing the shift. If difficulty occurs, shift transm is-
sion to N (Neutral), hold foot on brake, and turn engine
OFF. Make shift to desired mode.
4
FULLTIMEto4LOor4LOto4FULLTIME
NOTE: Shifting into or out of 4LO is possible with the
vehicle completely stop ped, how ever difficulty may oc-
cur due to the mating clutch teeth not being prop erly
aligned . Several attem pts may be requ ired for clutch
teeth alignm ent and shift completion to occur. The pre-
ferred method is with the vehicle rolling 2 to 3 mph (3 to
With the vehicle rolling at 2 to 3 mph (3 to 5 km/ h), shift
an autom atic transm ission to N (Neutral). While the
vehicle is coasting at 2 to 3 mph (3 to 5 km/ h), shift the
transfer case lever firm ly to the desired position. Do not
pause in transfer case N (Neutral).
5
with the vehicle moving faster than 2 to 3 mph (3 to 5
km/ h).
km/ h). Avoid attem pting to engage or disengage 4LO
NOTE:
To shift from 4 FULL TIME to 4LO, the shift
lever shou ld be pushed away from the driver, and then
rearw ard into 4LO. In 4 FULL TIME, there is a neu tral
stop to prevent shifting into N (Neutral) by accident.
NOTE: Pau sing in transfer case N (Neutral) in vehicles
equ ipped with an autom atic transm ission may requ ire
shu tting the engine OFF to avoid gear clash while
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)