WHATTODOINEMERGENCIES
299
JUMPSTARTINGPROCEDURE
4. Connect one end of a jumper cable to the positive
term inal of the discharged battery. Connect the other end
of the sam e cable to the positive term inal of the booster
battery.
NOTE: Check the charge ind icator on the battery. If the
ind icator is light or yellow, rep lace the battery.
1.
such as watch band s or bracelets that might make an
unintend ed electrical contact.
Wear eye protection and rem ove any metal jewelry
5.
Connect the other cable, first to the negative term inal
of the booster battery and then connect the other end to
a non-p aint metal surface on the engine of the vehicle
with the discharged battery. Make sure you have a good
contact on the engine.
2.
When boost is provid ed by a battery in another
vehicle, park that vehicle within booster cable reach but
withou t letting the vehicles tou ch. Set the parking brake,
place the autom atic transm ission in P (Park), or manu al
transm ission in N (Neutral), and turn the ignition to OFF
for both vehicles.
6.
battery, let the engine idle a few minu tes, then start the
engine in the vehicle with the discharged battery.
Start the engine in the vehicle which has the booster
6
7.
sequ ence exactly. Be carefu l of the moving belts and fan.
When rem oving the jumper cables, reverse the above
3.
load s.
Turn off the heater, rad io and all unnecessary electrical
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)