Tdi
OIL TEMPERATURE CONTROL VALVE
Service repair no - 12.60.69
Remove
OIL FILTER HEAD GASKET
Service repair no - 12.60.03
Renew
1.
2.
Disconnect oil cooler pipes.
1. Disconnect oil cooler pipes.
2. Disconnect pressure switch lead.
3. Remove securing bolts and withdraw head
complete with gasket.
Remove two bolts and carefully withdraw
thermostat extension housing (1) complete with
O ring seal (2), thermostat (3), two washers (4)
and spring (5).
4. Clean mating faces.
3.
4.
Clean adaptor housing.
Inspect all parts and renew as necessary.
5. Refit head with new gasket.
6. Secure with bolts. Tighten to 45 Nm.
7.
Refit pipes and reconnect pressure switch.
Refit
5.
Fit thermostat to extension housing ensuring pin
locates in hole.
6.
7.
8.
Fit two washers and spring to thermostat.
Fit a new ’O’ ring to extension housing.
Insert spring into adaptor and secure extension
housing to adaptor with bolts. Tighten to 9 Nm.
REPAIR
19
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)