44
AUTOMATIC GEARBOX
EXTENSION HOUSING
Service repair no - 44.20.18
Remove
Refit
9. Fit extension housing to gearbox, with a new
gasket, ensuring oil seal is not damaged by
extension shaft.
10.
Secure housing with nine bolts. Tighten to 23
Nm.
1.
Remove transfer gearbox. See TRANSFER
GEARBOX, Repair, LT230T Transfer Gearbox
Drain oil from automatic gearbox.
Remove bolts securing left hand mounting
bracket to extension housing and withdraw
bracket.
11. Refit transfer gear lever housing to top of
extension housing. Tighten to 25 Nm.
12. Refit mounting bracket to extension housing.
Tighten to 52 Nm.
2.
3.
13. Refit transfer gear box. See TRANSFER
GEARBOX, Repair, LT230T Transfer Gearbox
14. Refill automatic gearbox lubrication system with
correct grade of oil. See LUBRICANTS,
FLUIDS AND CAPACITIES, Information,
Recommended Lubricants and Fluids
4.
Remove transfer gear lever housing securing
bolts and move housing aside.
5.
Remove securing bolts and withdraw extension
housing from over coupling shaft. Remove and
discard gasket.
6.
7.
Place extension housing on bench and remove
oil seal.
Ensure that all surfaces are clean and housing is
free from damage. If damage is found and
housing has to be renewed remove dowels from
face of existing housing and fit to new housing.
Using special tool LST108 fit new oil seal to
housing.
8.
14
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)