54
FRONT AXLE AND FINAL DRIVE
12.
13.
Examine all components in particular inner and
outer track, cage balls and bearing surfaces for
damage and excessive wear.
Maximum acceptable end-float on assembled
joint 0,64mm. Renew if worn or damaged.
Lubricate with a recommended oil during
assembly.
19. Lubricate seal and lip with EP90 oil and with
cavity side leading press in a new oil seal using
special tool LRT-54-004.
Fit constant velocity joint to axle
14.
15.
Fit collar and a new circlip.
Engage constant velocity joint on axle shaft
splines and using a soft mallet, drive joint in fully.
20.
21.
Using special tool LRT-54-005, fit bearing with
its part number visible when fitted, and flush with
end face of stub axle.
Renew stub axle,thrust ring, oil seal and bearing
Press fit a new thrust ring onto stub axle.
16.
17.
Drill and chisel off thrust ring taking care to avoid
damaging stub axle.
Remove bearing and oil seal using special tool
LRT-37-004 and slide hammer LRT-99-004.
Ensure lip of tool locates behind bearing to to
drive it out.
18.
Repeat instruction for removal of oil seal.
4
OVERHAUL
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)