CHASSIS AND BODY
REAR DOOR
Service repair no - 76.28.19
Remove
1.
2.
3.
Remove the spare wheel from the exterior of the
door.
Remove the trim panel from inside the rear door.
See rear door trim panel.
Release the convoluted grommet from the door
post, expose the door harness connectors and
multiplugs and disconnect.
4.
Remove the circlip and washer from the check
stay pivot on the body.
WARNING: Instruction 5 MUST BE carried
out with assistance.
11.
12.
13.
Remove the two bolts, spring and plain washers
securing the door frame to the edge of the door.
Lift out the door frame complete with glass and
remove to a suitable workbench.
Remove the tape and slide the glass out of the
door frame channel.
5.
Suitably support the door, remove the four bolts
securing the hinges to the door and with
assistance slide the door off the hinges.
Refit
6.
Reverse removal procedure.
Refit
14.
Reverse removal procedure.
NOTE: When refitting the door glass frame
ensure that it is adjusted to suit the door
opening before fully tightening the
securing bolts.
REPAIR
11
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)