19
FUEL SYSTEM
ENGINE CONTROL MODULE (ECM)
Service repair no - 18.30.01
Remove
MASS AIR FLOW SENSOR (MAF SENSOR)
Service repair no - 19.22.25
Remove
1.
Disconnect battery negative lead.
1. Disconnect battery negative lead.
2.
Loosen clip and disconnect intake hose from
MAF sensor.
3.
4.
Disconnect multiplug from MAF sensor.
Release 2 clips and remove MAF sensor from air
cleaner.
2.
Release and move washer reservoir aside. See
WIPERS AND WASHERS, Repair, Washer
Reservoir
Remove 2 studs securing ECM cover.
Remove cover.
Disconnect 3 ECM multiplugs.
Remove 2 bolts securing ECM.
Release ECM from 2 lower retainers.
Remove ECM.
5.
Refit
6.
Collect ’O’ ring seal.
3.
4.
5.
6.
7.
8.
Ensure mating faces of air cleaner, MAF sensor
and intake hose are clean.
Fit ’O’ ring to MAF sensor.
Fit MAF sensor to air cleaner and secure with
clips.
7.
8.
9.
10.
Connect multiplug to MAF sensor.
Connect intake hose and secure with clip.
Refit
9.
Reverse removal procedure.
CAUTION: Failure to connect intake hose
securely will allow unmetered air to enter
the engine, causing running problems.
NOTE: Ensure ECM is correctly located by
lower retainers.
11.
Reconnect battery negative lead.
4
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)