MFI
FUEL FILTER
Service repair no - 19.25.02
Remove
Refit
WARNING: Spilling of fuel is unavoidable
during this operation. Ensure all
necessary precautions are taken to
6. Fit a new filter observing direction of flow arrows
stamped on canister.
7. Tighten securing nut and bolt.
prevent fire and explosion.
8. Fit inlet and outlet hoses. Tighten to 30Nm.
9.
Refit fuel pump relay module, reconnect battery.
WARNING: Ensure fuel handling
precautions given in Section 01 -
10. Start engine and inspect for fuel leaks around
hose connections.
Introduction are strictly adhered to when
carrying out following instructions.
1.
2.
3.
Depressurise fuel system. See Depressurising
Fuel System
Access to filter is gained through right hand rear
wheel arch.
Clean area around hose connections to prevent
ingress of foreign matter into fuel system. Clamp
inlet and outlet hoses to prevent fuel spillage
when disconnecting hoses.
4.
5.
Loosen two fuel line unions and remove hoses.
Plug ends of hoses to prevent ingress of dirt.
Release securing bolt and bracket and remove
filter from chassis side member.
REPAIR
17
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)