1998 Land Rover Workshop Manual

12
ENGINE
Exhaust only
CAMSHAFT DRIVE BELT
Service repair no - 12.65.17
Remove
13.
14.
Fit bolts finger tight.
Working from the centre outwards, progressively
tighten bolts to the correct torque.10Nm
NOTE: If the timing belt is to be removed
from the camshaft gears only, it is not
necessary to remove the drive belt,
crankshaft pulley or timing belt lower cover.
1.
2.
3.
4.
Remove drive belt.
Remove 5 bolts securing timing belt top cover.
Remove top cover.
Remove 5 bolts securing timing belt centre
cover.
5.
Remove timing belt centre cover.
Inlet and exhaust
15.
Fit spark plug cover to camshaft cover, tighten
screws.
6.
Rotate crankshaft to align timing marks on
camshaft gears - 90°BTDC.
20
REPAIR
Product Specification
CategoriesRange Rover
Tags
Model Year1998
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field